Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Bronze

private vlans

Hi  every body.

i have few questions about private vlan.

1)Let say we have a vlan 100,   we want to implement private vlans  on vlan 100.  Now when i create primary vlan ,  does the vlan number have to match i.e

switch(config)# vlan  100

switch(config-vlan) private-vlan primary

or it can be different?

2)  Let say we have a multilayer switch  with few vlans, 1,2  , we implemented the private vlans on vlan 2.   Hosts on vlan 2  use  vlan svi  199.199.199.2/24  as  default gateway.     Given that  all  required configuration  has been done on the switch  except for  svi 199.199.199.2/24.

Will the following configuration be enough on svi 199.199.199.2/24:

switch(config) interface vlan 2

switch(config-if) private-vlan mapping 1.

thanks  and have a good day.

319
Views
0
Helpful
0
Replies