I have some questions considering private vlans. I understand how it had to be configured and who it works in general. But i have some questions considering its functionality in depth. As i understand during the frame encapsulation process the secondary vlan is injecting to the frame, then when switch considering its CAM table decides to move the frame through uplink(promiscuous port) with primary vlan it removes the tag of secondary vlan from the frame and injects the tag of primary vlan. Am i right? If i am right this technology is very like dot1q tunneling with vlan transation. If i am not right, please correct me. I need the explanation considering OSI model.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...