Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

privilege level access on CATOS

Hello folks. I need a little help. I'm trying to set up different privilege level access on my switches. I found out that 1 switch is running CATOS I don't know the command or if it is even possible to set it up. Please help.

--------------------

username admin privilege 0 password 0 test

privilege exec level 0 terminal lenght 0

privilege exec level 0 show interfaces

________________

Thanks,

JP

2 REPLIES

Re: privilege level access on CATOS

This could be accomplished on IOS, but there is no equivalent way to do this on CATOS.

You can use Command Authorization, which is possible only with tacacs+. You can use the cisco ACS server for that.

http://www.cisco.com/en/US/tech/tk59/technologies_tech_note09186a0080094ea4.shtml#f

The Catalyst has non-privileged (equivalent to '1') & privileged (equivalent to '15').

Purple
453
Views
0
Helpful
2
Replies