Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Privilege Levels

Privilege levels are from 0-15, where 15 is the full & 1 is the low & 5 is the medium, but what about the rest & also how do i make use of this in the Cisco ACS? because i am planning to make use of this privilege level in the group settings, like only some particular commands should be allowed for certain users using cisco ACS, so how do i do that?

2 REPLIES

Re: Privilege Levels

Please check the link below for a few examples:

http://www.cisco.com/en/US/tech/tk59/technologies_tech_note09186a008009465c.shtml

Regards,

Leo

New Member

Re: Privilege Levels

Hi,

By default, there are three privilege levels on the router.level 1 ,15 ,0

you can make use of other levels by defining commands to that level by (for exp)

privilege exec level X configure terminal

for more details..

http://www.cisco.com/en/US/tech/tk59/technologies_tech_note09186a008009465c.shtml

hope this will help.

rgrds,

130
Views
0
Helpful
2
Replies
CreatePlease login to create content