Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

problem about WS-X6724-SFP GLC-T

my environment:

WS7609-S <-----> 7204

SUP-720-3B with c7600s72033-adventerprisek9-mz.122-33.SRE1.bin

modules: WS-X6724-SFP , and several GLC-T

now i met these trouble/questions below:

1st: I try to use a twist UTP(straight) connect between 7609's GLC-T 1000M interface and 7200's FastEthernet interface.

But they couldn't go up both line and protocol.

2nd: Now I've to using the GigaEthernet of SUP720 instead of the GLC-T.

That would work well.

Q1: GLC-T can only work in 1000M mode ?

I can't input "speed 100" command in config-if

REGARDS
Coast

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: problem about WS-X6724-SFP GLC-T

It is not the GLC-T, where it supports 10/100/1000

http://www.cisco.com/en/US/prod/collateral/modules/ps5455/ps6577/product_data_sheet0900aecd8033f885.html

It is the 6724 line card. Since it is a mix media (SFP) line card, it only supports 1G.

HTH,

jerry

2 REPLIES
Cisco Employee

Re: problem about WS-X6724-SFP GLC-T

It is not the GLC-T, where it supports 10/100/1000

http://www.cisco.com/en/US/prod/collateral/modules/ps5455/ps6577/product_data_sheet0900aecd8033f885.html

It is the 6724 line card. Since it is a mix media (SFP) line card, it only supports 1G.

HTH,

jerry

New Member

Re: problem about WS-X6724-SFP GLC-T

thank u

1912
Views
0
Helpful
2
Replies
CreatePlease login to create content