Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Problem from upgrade DFC to DFC3A on WS-X6816-GBIC

I'm use DFC3A upgrade from DFC for 720-3B. But when install line Card (WS-X6816-GBIC) this log is show.

Sep 9 09:17:06.031: %DIAG-SP-6-RUN_MINIMUM: Module 1: Running Minimal Diagnostics...

Sep 9 09:18:08.061: %DIAG-SP-3-MAJOR: Module 1: Online Diagnostics detected a Major Error. Please use 'show diagnostic result <target>' to see test results.

Sep 9 09:18:08.085: %CONST_DIAG-SP-3-BOOTUP_TEST_FAIL: Module 1: TestLoopback failed on port(s) 1-16

Sep 9 09:18:08.085: %CONST_DIAG-SP-3-BOOTUP_TEST_FAIL: Module 1: TestConditionalLearn failed

Sep 9 09:18:08.085: %CONST_DIAG-SP-3-BOOTUP_TEST_FAIL: Module 1: TestMacNotification failed

Sep 9 09:18:08.085: %CONST_DIAG-SP-3-BOOTUP_TEST_FAIL: Module 1: TestFibDevices failed

Sep 9 09:18:08.085: %CONST_DIAG-SP-3-BOOTUP_TEST_FAIL: Module 1: TestIPv4FibShortcut failed

Sep 9 09:18:08.085: %CONST_DIAG-SP-3-BOOTUP_TEST_FAIL: Module 1: TestIPv6FibShortcut failed

Sep 9 09:18:08.085: %CONST_DIAG-SP-3-BOOTUP_TEST_FAIL: Module 1: TestNATFibShortcut failed

Sep 9 09:18:08.085: %CONST_DIAG-SP-3-BOOTUP_TEST_FAIL: Module 1: TestMPLSFibShortcut failed

Sep 9 09:18:08.085: %CONST_DIAG-SP-3-BOOTUP_TEST_FAIL: Module 1: TestL3VlanMet failed

Sep 9 09:18:08.085: %CONST_DIAG-SP-3-BOOTUP_TEST_FAIL: Module 1: TestIngressSpan failed

Sep 9 09:18:08.085: %CONST_DIAG-SP-3-BOOTUP_TEST_FAIL: Module 1: TestEgressSpan failed

Sep 9 09:18:08.085: %CONST_DIAG-SP-3-BOOTUP_TEST_FAIL: Module 1: TestAclPermit failed

Sep 9 09:18:08.085: %CONST_DIAG-SP-3-BOOTUP_TEST_FAIL: Module 1: TestAclDeny failed

Sep 9 09:18:08.085: %CONST_DIAG-SP-3-BOOTUP_TEST_FAIL: Module 1: TestQos failed

Sep 9 09:18:08.261: %OIR-SP-3-LC_FAILURE: Module 1 has Major online diagnostic failure, Card will be powered reset to re-run diagnostic. Please check bootflash diaginfo file for previous detailed diagnostic result.

Sep 9 09:18:08.293: %C6KPWR-SP-4-DISABLED: power to module in slot 1 set off (Reset)

Please help me

1 REPLY
New Member

Re: Problem from upgrade DFC to DFC3A on WS-X6816-GBIC

can we try to Re-seat the card and retry the test.

788
Views
0
Helpful
1
Replies