Problem: Getting an IP multicast message from a server to a client across a Cisco Aironet 1240 AG access point.
A server is generating a multicast message to address 126.96.36.199.A client is connected to the network through an access point.The client is running an application that listens for the multicast message.Will the access point support this protocol? I have not been able to see the multicast data once the client is on the wireless network. The client can see the data when wired to the network.
Re: Problem: Getting an IP multicast message from a server to a
I logged a ticket with cisco support engineers and they figured out the problem. The engineer on the case suspected the web page inteface for the Access Point only touched the radio side of the snooping. To correct the problem you must telnet or SSH into the device and issue the following commands.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...