Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

problem in boot the switch 2960

HI

I have switche cisco 2960

When you boot it displays the following message

So that the green lights are working well

Please help me in solving the problem

5 REPLIES
Hall of Fame Super Gold

problem in boot the switch 2960

There's a possibilty the baud rate of your HyperTerminal client and the switch do not match.

Community Member

problem in boot the switch 2960

Of very normal to be 9600

Hall of Fame Super Gold

Re: problem in boot the switch 2960

These are the settings to your hyperterminal.

9600 baud rate

No parity

8 data bits

1 stop bit

No flow control

And if these settings don't work then try to adjust the baud rate higher or lower until you tried all of them.

Community Member

Re: problem in boot the switch 2960

I tried changing each setting for speed, parity, etc. and connecting after each change - none of them got any output.

Hall of Fame Super Gold

Re: problem in boot the switch 2960

Use a different client/computer/laptop.

328
Views
0
Helpful
5
Replies
CreatePlease to create content