Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Problem in Object Tracking On a Cat 6509

Hello All,

I want to configure object tracking on Cat 6509, the sample configuration is provided below..I am not able to configure a portion of the command shown in inverted commas.

interface VlanX

ip address x.x.x.x 255.255.255.x

ip policy route-map PBR

route-map PBR permit 10

set ip next-hop verify-availability "192.168.0.10 10 track 123"

set ip next-hop verify-availability "192.168.1.20 20 track 124"

!

!

control-plane

!

rtr 1

!

type echo protocol ipIcmpEcho 4.2.2.3

rtr schedule 1 life forever start-time now

!

rtr 2

type echo protocol ipIcmpEcho 4.2.2.4

rtr schedule 2 life forever start-time now

!

track 123 "rtr 1 reachability"

track 124 "rtr 2 reachability"

Here's the sh ver of cat 6509 :--------->

ND-GF-S6509-01#sh ver

Cisco Internetwork Operating System Software

IOS (tm) s72033_rp Software (s72033_rp-PK9SV-M), Version 12.2(17d)SXB11a, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2006 by cisco Systems, Inc.

Compiled Thu 13-Apr-06 04:50 by kehsiao

Image text-base: 0x40020FBC, data-base: 0x41F18000

ROM: System Bootstrap, Version 12.2(17r)S4, RELEASE SOFTWARE (fc1)

BOOTLDR: s72033_rp Software (s72033_rp-PK9SV-M), Version 12.2(17d)SXB11a, RELEASE SOFTWARE (fc1)

ND-GF-S6509-01 uptime is 14 weeks, 4 days, 13 hours, 15 minutes

Time since ND-GF-S6509-01 switched to active is 14 weeks, 4 days, 13 hours, 14 minutes

System returned to ROM by unknown reload cause - suspect boot_data[BOOT_COUNT] 0x0, BOOT_COUNT 0, BOOTDATA 19 (SP by reload)

System restarted at 07:51:34 GMT Fri Dec 14 2007

System image file is "sup-bootflash:/s72033-pk9sv-mz.122-17d.SXB11a.bin"

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to

export@cisco.com.

cisco WS-C6509-E (R7000) processor (revision 1.2) with 458752K/65536K bytes of memory.

Processor board ID SMC1026002Z

SR71000 CPU at 600Mhz, Implementation 0x504, Rev 1.2, 512KB L2 Cache

Last reset from power-on

X.25 software, Version 3.0.0.

Bridging software.

4 Ethernet/IEEE 802.3 interface(s)

25 Virtual Ethernet/IEEE 802.3 interface(s)

144 FastEthernet/IEEE 802.3 interface(s)

74 Gigabit Ethernet/IEEE 802.3 interface(s)

4 Ten Gigabit Ethernet/IEEE 802.3 interface(s)

1917K bytes of non-volatile configuration memory.

8192K bytes of packet buffer memory.

65536K bytes of Flash internal SIMM (Sector size 512K).

Configuration register is 0x2102

I HAVE ALSO ATTACHED THE SCREEN SHORTS OF THE CONFIGURATION PROCESS....

Regards

Rohit

321
Views
0
Helpful
0
Replies