Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Problem recognizing NM-NAM in router

Hi,

I've just installed an NM-NAM in a 3825 running 15.1 and the card is seen an initial boot, but can't be seen when iOS is booted - throws the errors below in this abridged concole output - the card also doesn't have a CF card - is that an issue?

Initializing ATA monitor library.......

program load complete, entry point: 0x8000f000, size: 0xc0c0

Initializing ATA monitor library.......

program load complete, entry point: 0x80010000, size: 0x40c2dac

Self decompressing the image : ############################################################################################################################################################################################################################################################################################################################################################################################################################# [OK]

Smart Init is enabled

smart init is sizing iomem

  ID            MEMORY_REQ                 TYPE

00042A          0X010D78F3 C3825 motherboard

00046A          0X0004FE00 NAM Sensor NM

0002A9          0X001E4E2F 16 port ethernet switch

                0X00288860 Onboard PVDM2 SIMM

                0X0027250A Onboard VPN

                0X000021B8 Onboard USB

                0X00660670 public buffer pools

                0X0078F000 public particle pools

-----------------------------------------------

TOTAL:          0X025F8AB4

export@cisco.com.

Installed image archive

Cisco 3825 (revision 1.1) with 485376K/38912K bytes of memory.

Processor board ID FTX1014A0K8

16 FastEthernet interfaces

3 Gigabit Ethernet interfaces

1 Virtual Private Network (VPN) Module

DRAM configuration is 64 bits wide with parity enabled.

479K bytes of NVRAM.

126000K bytes of ATA System CompactFlash (Read/Write)

Press RETURN to get started!

*Sep  6 22:41:31.751: %I82559FE-1-NOT82559: NM slot 1: PCI device ID seen as 0xFFFFFFFF, expected 0x12298086

*Sep  6 22:41:31.751: %JETFIRE_SM-1-INITFAIL: NM slot 1: PCI device 0 initialization failed

127
Views
0
Helpful
0
Replies
CreatePlease to create content