My cat 2950 ios got corrupted after a power failure and am having a difficult time to restore it.
When I do "copy xmodem flash:c2950-i6q4l2-mz.121-13.EA1.bin" I get "xmodem: permission denied" error I also tried "copy c2950-i6q4l2-mz.121-13.EA1.bin flash:c2950-i6q4l2-mz.121-13.EA1.bin" and I get the same error.
I already have solved the problem. There was a missing colon after xmodem and because there was no indication there a syntax mistake I spent a gr8 time googling but I eventually found my mistake and the upgrade went on right.
My problem now is that even though I have the new ios in the system, the the first 8 port (fa0/1 - fa0/8) are not in a working state and when I connect my PC to any of those ports, it shows up 10 Mbps on the NIC of the PC, checking on the switch reveals that the speed is set 10000 but changing it to 100000 does not return them to a working state.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.