Problem syncing Annex M with 0.0.026?

[AdamPage1]

Hi All,

I've recently tried to update the modem firmware on an 887M that is actually using an Annex M service and after rebooting to kick in the new modem firmware, the router loses sync. I've tried this with various other 877, 877M, 887 and 887Ms on normal Annex A services with no problems, but this Annex M service doesn't like it at all.

any thoughts? Is this worth reporting to Cisco (somehow?)

[Daniele Giordano]

Try to force the operating mode:

command "dsl operating-mode", default is auto mode;

command "dsl sync mode";

command "dsl sync interval";

Regards.

[AdamPage1]

Hi,

Tried that with no joy!