Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Problem whit Cisco 2650XM

Hi

We have a Cisco 2650 connected to one  E1, but recently it has a lot of channels in  state connecting, this channels likes:

this is of output for command a

1C92 : 877 16890070ms.1 +-1 pid:2000 Answer 433 connecting
dur 00:00:00 tx:8998/1439680 rx:0/0
IP 172.16.30.10:12420 SRTP: off rtt:0ms pl:0/0ms lost:0/0/0 delay:0/0/0ms g711ulaw TextRelay: off
media inactive detected:n media contrl rcvd:n/a timestamp:n/a
long duration call detected:n long duration call duration:n/a timestamp:n/a

1C92 : 878 16890500ms.1 +-1 pid:1100 Originate B#2594181 connecting
dur 00:00:00 tx:0/0 rx:8998/1439680
Tele 1/1:1 (878) [1/1.2] tx:177050/177050/0ms g711ulaw noise:-84 acom:7  i/0:-44/-44 dBm

1D2E : 931 17086560ms.1 +-1 pid:2000 Answer 433 connecting
dur 00:00:00 tx:8999/1439840 rx:0/0
IP 172.16.30.10:10418 SRTP: off rtt:0ms pl:0/0ms lost:0/0/0 delay:0/0/0ms g711ulaw TextRelay: off
media inactive detected:n media contrl rcvd:n/a timestamp:n/a
long duration call detected:n long duration call duration:n/a timestamp:n/a

1D2E : 932 17086990ms.1 +-1 pid:1100 Originate B#2594181 connecting
dur 00:00:00 tx:0/0 rx:8999/1439840
Tele 1/1:1 (932) [1/1.1] tx:175220/175220/0ms g711ulaw noise:-84 acom:45  i/0:-44/-44 dBm

how can we clear those channels without having to reload? thanks

152
Views
0
Helpful
0
Replies