I'm almost embarassed to ask this, but I seem to have an issue enabling the management port on a 5760 WLC -- two of them in fact.
On one unit I used the built-in setup script, on the other unit I tried manual configuring.
In both cases, the MGMT LED does not light up at all (I don't know what normal behavior is). Only when I set both the WLC and switch port (Cisco 4500) to auto does the switch show connected (at 100/HD) but the WLC shows down-down regardless of what I've tried.
Please tell me I'm missing something tremendously stupid here (and preferably what it is I'm missing).
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.