Problem with Cisco 2911 configuration

[SteveHoyle]

I have a Cisco 2911 plugged into an HP Switch which also runs fiber to another HP Switch.  Both of these switches run to multiple computers.  There are two networks but only one router.  I can ping anywhere outside from the router and also to any computer.  I can ping the router from one network but not the other.  I can ping one network from the computer but not the other way around.  I can't ping to the ISP's DNS or any website from any computer.  Can someone please help me with this?

[SteveHoyle]

Thank You, The Router is now working with all the computers on but networks.

I added.

nac1)#permit ip 172.18.113.0 0.0.0.255 any

nac1)#permit ip 172.18.112.0 0.0.0.255 any

and also added.

ip route to DNS and ISP Gateway.

[willymaldonado1]

I'm glad you have achived success in your task.....

rate if possible...

Best regards,

Willy

[Warren.Arthur]

GREAT JOB STEVE!!

You can now safely Save your configurations!!