Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

problem with Cisco 3560 switch

I have using Cisco 3560 catalyst switch

with IOS Release 12.2(25)SEB4. But the problem is that the switch does not support

service-policy output to restrict egress bandwidth in an interface as we can do in Cisco 3550 switch.

Any workout in this problem.....

Rajib

2 REPLIES

Re: problem with Cisco 3560 switch

Rajib,

3560 does not support egress policing. It supports policing on the ingress

try the command service-policy input < >

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat3560/12225se/3560scg/swqos.htm#wp1044737

HTH, rate if it does

Narayan

New Member

Re: problem with Cisco 3560 switch

To get the egress policing you need, without buying new hardware, you might trying using a class-map to match the traffic and a policy-map to apply traffic-shaping.

Apply the policy-map to your router interface with the service-policy command.

http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/products_configuration_guide_chapter09186a00800bd909.html

175
Views
3
Helpful
2
Replies
CreatePlease to create content