Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Problem with IOS

I'm having problems with IOS file (1700 series router), when i try boot the router with the new IOS appear this error:

*** System received a Software forced crash ***

signal= 0x17, code= 0x5, context= 0x0

PC = 0xbaddaddd, Vector = 0xbaddaddd, SP = 0xbaddaddd

how can i solv this?

2 REPLIES
New Member

Re: Problem with IOS

Hi,

This KB article should point you in the right direction:

http://www.ciscotaccc.com/kaidara-advisor/core/showcase?case=K48918452

You said that you had tried loading a new IOS - I assume the router was working well before, so the most likely cause of this error is corrupt IOS image.

You can try downloading a new IOS image from Cisco.com. You will probably have to load this new IOS from ROMMON mode on the router. Please refer here for a how-to:

http://www.cisco.com/en/US/partner/products/hw/routers/ps221/products_tech_note09186a00800942dc.shtml

Hope this helps.

Oliver

New Member

Re: Problem with IOS

Oliver

Thanks for your advice. I'll try.

250
Views
0
Helpful
2
Replies