cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2729
Views
0
Helpful
1
Replies

Problem with ip policy route-map on catalyst 3560

villi1977
Level 1
Level 1

Hello all.

Please help my.

Dont save ip policy route-map.

IOS on catalyst 3650 is c3560-ipservicesk9-mz.122-52.SE.bin

Switch(config)#route-map test-access permit 10
Switch(config-route-map)#match ip route-source 20
Switch(config-route-map)#set ip default next-hop 192.168.211.25
Switch(config-route-map)#exit
Switch(config)#access-list 20 permit 192.168.55.0 0.0.0.255
Switch(config)#interface vlan503
Switch(config-if)#ip policy route-map test-access
Switch(config-if)#ip route-cache policy
Switch(config-if)#exit
Switch(config)#ip local policy route-map test-access
Switch(config)#end

Switch#show route-map test-access
route-map test-access, permit, sequence 10
  Match clauses:
    ip route-source (access-lists): 20
  Set clauses:
    ip default next-hop 192.168.211.25
  Policy routing matches: 384 packets, 95266 bytes
Switch#show ip policy
Interface      Route map
local          test-access

I`m dont visible string "ip policy route-map test-access" after running show running-config

interface Vlan503
ip address 192.168.55.1 255.255.255.0
ip route-cache policy

ip policy route-map test-access dont setting.

Please help my.

1 Reply 1

Jon Marshall
Hall of Fame
Hall of Fame

Have you enabled the routing template ie.

3560(config)# sdm prefer routing

Jon

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: