Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Problem with module WS-X4548-GB-RJ45V in Catalyst 4506

We are have Catalyst 4506, Version 12.1(19)EW1, Supervisor WS-X4515, WS-X4148-RJ, and new module WS-X4548-GB-RJ45V.

when wrote >show module

3 0 Unsupported module WS-X4548-GB-RJ45V JAE1040CVWT

What is this problem?

2 REPLIES
Cisco Employee

Re: Problem with module WS-X4548-GB-RJ45V in Catalyst 4506

Hi Den,

The image which you are running on your sup engine does not support the card WS-X4548-GB-RJ45V and is the reason it is going into UNKNOWN State

This card need minimum 12.2(18)EW and recommended image is 12.2(25)EWA6

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat4000/relnotes/ol_5184.htm

HTH

Ankur

*Pls rate all helpfull post

New Member

Re: Problem with module WS-X4548-GB-RJ45V in Catalyst 4506

Thank's

225
Views
0
Helpful
2
Replies