11-23-2006 12:57 PM - edited 03-05-2019 12:59 PM
The switch no work! The system led is solid green and other all is off. The port leds of 3-48 are solid green and they are not connect and 1-2 port leds are off. Anex the error file of console.
Any suggestions?
11-23-2006 01:54 PM
Hi ,
The following is the decode of the traceback taken from error file.
0x1A7514:chunk_malloc(0x1a74a8)+0x6c
0x2C4AE0:vra_handle_alloc(0x2c4a30)+0xb0
0x2D74C4:map_mgr_init(0x2d7478)+0x4c
0x2B46AC:vegas_subsys_init(0x2b4298)+0x414
0x1C3C30:subsys_init_routine(0x1c3c08)+0x28
0x1C3CE0:subsys_init_class(0x1c3c40)+0xa0
0x1058D8:system_init(0x10564c)+0x28c
0x105ADC:init_process(0x105a8c)+0x50
0x1CCCD8:process_execute(0x1ccb7c)+0x15c
and
Enter hex value: 0x002B6B78
0x002B6B78:SCMoleculeSend(0x2b6b04)+0x74
Enter hex value: 0x002CB454
0x002CB454:jelk_get_link_status(0x2cb3dc)+0x78
Enter hex value: 0x0035A5E8
0x0035A5E8:vpd_poll_status(0x35a554)+0x94
Enter hex value: 0x002F12A0
0x002F12A0:vled_process(0x2f1240)+0x60
Enter hex value: 0x001CCCD8
0x001CCCD8:process_execute(0x1ccb7c)+0x15c
Enter hex value: 0x00B59768
0x00B59768:etext(0x6760f4)+0x4e3674
Enter hex value: 0x00B597B0
0x00B597B0:etext(0x6760f4)+0x4e36bc
*** Best thing is to go for RMA.
Thanks,
satish
11-23-2006 06:14 PM
RMA the switch . If you don't have a contract then it is time to buy a new switch . That appears to be a hardware failure .
11-23-2006 08:06 PM
use these commands
sh post
sh tech-support
and send the result to TAC
looks like the switch is faulty
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: