Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Problem with my Catalyst 3550-48-SMI

The switch no work! The system led is solid green and other all is off. The port leds of 3-48 are solid green and they are not connect and 1-2 port leds are off. Anex the error file of console.

Any suggestions?

3 REPLIES
Silver

Re: Problem with my Catalyst 3550-48-SMI

Hi ,

The following is the decode of the traceback taken from error file.

0x1A7514:chunk_malloc(0x1a74a8)+0x6c

0x2C4AE0:vra_handle_alloc(0x2c4a30)+0xb0

0x2D74C4:map_mgr_init(0x2d7478)+0x4c

0x2B46AC:vegas_subsys_init(0x2b4298)+0x414

0x1C3C30:subsys_init_routine(0x1c3c08)+0x28

0x1C3CE0:subsys_init_class(0x1c3c40)+0xa0

0x1058D8:system_init(0x10564c)+0x28c

0x105ADC:init_process(0x105a8c)+0x50

0x1CCCD8:process_execute(0x1ccb7c)+0x15c

and

Enter hex value: 0x002B6B78

0x002B6B78:SCMoleculeSend(0x2b6b04)+0x74

Enter hex value: 0x002CB454

0x002CB454:jelk_get_link_status(0x2cb3dc)+0x78

Enter hex value: 0x0035A5E8

0x0035A5E8:vpd_poll_status(0x35a554)+0x94

Enter hex value: 0x002F12A0

0x002F12A0:vled_process(0x2f1240)+0x60

Enter hex value: 0x001CCCD8

0x001CCCD8:process_execute(0x1ccb7c)+0x15c

Enter hex value: 0x00B59768

0x00B59768:etext(0x6760f4)+0x4e3674

Enter hex value: 0x00B597B0

0x00B597B0:etext(0x6760f4)+0x4e36bc

*** Best thing is to go for RMA.

Thanks,

satish

Purple

Re: Problem with my Catalyst 3550-48-SMI

RMA the switch . If you don't have a contract then it is time to buy a new switch . That appears to be a hardware failure .

New Member

Re: Problem with my Catalyst 3550-48-SMI

use these commands

sh post

sh tech-support

and send the result to TAC

looks like the switch is faulty

118
Views
1
Helpful
3
Replies
CreatePlease login to create content