Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Problem With SUP-720-3B

Hi All,

I am facing problem with 7609S redudancy because of one of sup is not booting properly and getting error message in rommon mode,

*** System received a Software forced crash ***

signal= 0x17, code= 0x24, context= 0x4202cf84

PC = 0x401adfb4, Cause = 0x5820, Status Reg = 0x34008002

rommon 2 >

System Bootstrap, Version 8.4(2) Release

Copyright (c) 1994-2005 by cisco Systems, Inc.

Cat6k-Sup720/SP processor with 524288 Kbytes of main memory,

kindly suggess me ho to trouble shot the same.

1 REPLY
Hall of Fame Super Silver

Re: Problem With SUP-720-3B

Hello Vineet,

if you can (you are not in production) try to power off the chassis remove the working supervisor an try to start with only the troubled one.

Sometimes the problem can be caused by the mate supervisor stopping the second one during boot.

if the problem remains the supervisor has real troubles.

Hope to help

Giuseppe

248
Views
0
Helpful
1
Replies
CreatePlease to create content