10-24-2013 02:06 PM - last edited on 03-07-2019 04:13 PM by NikolaIvanov
Have problem with some Switches.. They connected to RADUIS server, when I try to login using my User Name and Passowrd it's showing me:
% timeout expired
% Authentication failed
and when I cut the power from the Switch and put it back agian, it's working fine.. Any Suggestion about this issue???
Thanks
10-26-2013 02:49 AM
Hi Ameer,
If I understood your concern right, you mean to say that it only works when you reload the switches in question.
Could you please explain little more about your setup like:
1.] When you see prompt for username and password, it doesn't allow you to enter the credentials and timeout.
2.] Could you please attch "show run" and "show ver" from one of the switches?
3.] What radius server are you using? Do you see any error on the radius server?
I would also request for debugs to further troubleshoot this issue if required:
debug radius
debug aaa authen
~BR
Jatin Katyal
**Do rate helpful posts**
10-26-2013 11:33 AM
I guess it would be usefull to reconfigure your aaa to authenticate console logons with enable password only.
In this case you will be able to troubleshoot radius.
10-30-2013 11:18 AM
Thanks For Reply,
Jatin,
I'm able to see UN and PW prompt, and when I Enter my US and PW it show like that:
This Switch was working fine. and then this issue happend..
Also when I connect to Consol Cable I have the Same Issue. I can't login to the Switch from Consol or Telnet until I reboot the Switch.
One more thing, I have many Switches With Same Model and IOS, connected to same RADUIS Server and all Working Fine..
Switch is 3560-24 Ports
Thanks
Ameer
10-30-2013 12:11 PM
Thanks!!!
I guess you forgot to reply question 2 and 3.
2.] Could you please attch "show run" and "show ver" from one of the switches?
3.] What radius server are you using? Do you see any error on the radius server?
~BR
Jatin Katyal
**Do rate helpful posts**
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide