Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Problem with traffic passing through a vlan at Layer 2

Hi i have a problem with traffic passing through a specific Vlan details below:

The background to this is that traffic in one vlan keeps stopping. The fix for this has been to suspend the vlan (44) in the layer 2 part of the 6500 chassis, but this keeps reoccurring. I am a bit stumped as to why and now the switch has been rebooted and its still occurring.

I have checked the logs and have done a bug scrub and can see nothing that could have caused this issue.

Thanks

Kev

4 REPLIES

Re: Problem with traffic passing through a vlan at Layer 2

What is your layer 3 devices config??

New Member

Re: Problem with traffic passing through a vlan at Layer 2

Please find the Layer 3 RP config attached.

Thanks

Kev

Re: Problem with traffic passing through a vlan at Layer 2

Seems to be right, did you try debuging IPX issue?? Is there an IPX server on VLAN 44 that you could monitor your problem??

Re: Problem with traffic passing through a vlan at Layer 2

Check if your IOS version does not have a bug with IPX or some other service you are running, you can check this here:

http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl

Hope this helps

Juan Carlos Arias

133
Views
0
Helpful
4
Replies
CreatePlease to create content