Hi there,
I have a router 4700 with a fastethernet interface (LAN) and a serial interface with leased line to our HeadOffice. Everybody that go outside the LAN has to make NAT. I have configured dynamic NAT with a pool "ip nat pool p50200 10.99.101.1 10.99.101.255 netmask 255.255.255.0" but I have to configure static NAT for some addresses "10.99.101.101, 10.99.101.181, 10.99.101.208". The problem is that the NAT translation for "10.99.101.101, 10.99.101.181, 10.99.101.208" are duplicated.
I Know that the global addresses use in static translations are not automatically excluded with dynamic pools containing those global addresses but I don?t know how exclude that addresses from the pool.
Thank for your help.
Bye