Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Problems routing

HI,

I attach my configuration.

There is a problem routing in this configuration, is no possible to ping with this attached configuration to 192.168.15x.x machine and 10.21.18.21 machine.

Now, with this configuration I only can ping to 10.21.18.21 machine...

why?

Best regards and thks.

7 REPLIES
Hall of Fame Super Silver

Re: Problems routing

Edgar

I recognize sometimes the need to protect sensitive data. But to post a config about a routing problem in which interfaces are blanked out and ip addresses are hidden is to prevent us from helping you figure out your problem. If we are to be able to help you at all with this issue you must give us reasonable information to work with.

HTH

Rick

Silver

Re: Problems routing

I agree with Rick, it is hard to know what you have set up with everything important removed. One thing I see is your ip route statement.

Right now you have a default route going to ATM1.1 and there is no metric there.

Then you have a route statment for 192.168.156.0 to go out ATM0.1 with a weight of 200.

Remove the weight.

ip route 192.168.156.0 255.255.255.0 ATM0.1

Then make sure the interface is up/up and that you don't have an acl on the other end blocking ICMP

New Member

Re: Problems routing

Hi,

First... you are right excuse me!!!!!!!!!!

I only post routing parts because I "play" with routes and metrics and worked fine only one no both.

I'll make the changes

Best regards

New Member

Re: Problems routing

HI,

Not helpfull...

I'have added static routes as follows:

ip route 192.168.156.0 255.255.255.0 ATM0.1 but

nothing.

what can I do?

Blue

Re: Problems routing

Edgar:

Como que usted no entiende lo que te estan pidiendo.

Como putas vamos a poder ayudarte y explicarte cuales son las equivocaciones en el config si has escondido toda la informacion pertinente???

Tenemos que ver todos los IP addresses de todos los interfaces, etc...

Ya basta con esa chingueria, hombre..

Gracias :-)

Victor

Silver

Re: Problems routing

paste your config as requested in the first reply. This will help understand what you have in place. You are using private IP's so no worry of security there.

Also provide:

sh ip int brief

traceroutes from both directions

along with the config.

Cisco Employee

Re: Problems routing

please ignore...just testing.

143
Views
1
Helpful
7
Replies