Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Proceso Cat4k Mgmt LoPri constante alto uso CPU

Buenas tardes a todos:

Necesito saber por qué este proceso está pegado en 93% y como se puede bajar y los efectos de hacer lo sugerido. se enviá los issues:

SW#sh proc cpu | exc 0.0

CPU utilization for five seconds: 97%/0%; one minute: 96%; five minutes: 96%

PID Runtime(ms)   Invoked      uSecs   5Sec   1Min   5Min TTY Process

  51     5971720  17889032        333  3.19%  2.99%  2.99%   0 Cat4k Mgmt HiPri

  52   206956356  35760512       5787 94.07% 93.21% 93.41%   0 Cat4k Mgmt LoPri

sh ver
Cisco IOS Software, Catalyst 4500 L3 Switch Software (cat4500-IPBASE-M), Version 12.2(53)SG2, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Tue 16-Mar-10 00:54 by prod_rel_team
Image text-base: 0x10000000, data-base: 0x11B95764

ROM: 12.2(31r)SGA4
Pod Revision 0, Force Revision 31, Gill Revision 19

SW_TRKDMZ_LGVL uptime is 8 weeks, 6 days, 6 hours, 11 minutes
System returned to ROM by power-on
System restarted at 04:20:32 Chile Sat Sep 3 2011
System image file is "bootflash:cat4500-ipbase-mz.122-53.SG2.bin"

cisco WS-C4948-10GE (MPC8540) processor (revision 5) with 262144K bytes of memory.
Processor board ID FOX1502G7BQ
MPC8540 CPU at 667Mhz, Fixed Module
Last reset from PowerUp
2 Virtual Ethernet interfaces
48 Gigabit Ethernet interfaces
2 Ten Gigabit Ethernet interfaces
511K bytes of non-volatile configuration memory.

Configuration register is 0x2101

Por su ayuda muchas gracias.

Atte. Carlos Chavarriga B. Ingeniero Operaciones.

Everyone's tags (2)
1 REPLY
Purple

Proceso Cat4k Mgmt LoPri constante alto uso CPU

2884
Views
0
Helpful
1
Replies
CreatePlease login to create content