PVID is a command in Huawei switches that mark all the untagged paquets of that port with the VLAN 350. I want to check if Cisco has something like that, 'cuase I need that a Huawei AP goes through a Cisco switch to its controller to register, but without this the paquets doesn't go through the Cisco Router.
it seems a bit odd that Huawei switches add a vlan id of 350 to untagged packets, as this would mean the packets are not untagged any longer and thus all devices on the way would try to switch them into vlan 350.
with cisco you can set a native vlan and all packets sourced from this vlan are sent untagged.
if Huawei really adds all untagged packets to vlan 350, i guess you would need to add a vlan 350 to the cisco devices!?
maybe there is someone who has more experience with Huawei than me!
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.