Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

PVLANs

Hi,

I've the below scenario, and just wondering can it be done :

3 VLANs, VLAN A (10.1.1.0/24), VLAN B (10.1.2.0/24) and VLAN C (10.1.3.0/24), with the limitations :

- VLAN B & VLAN C can communicate to VLAN A and vice-versa

- members in VLAN B and VLAN C cannot communicate with each other

- each VLAN will have L3 ip address as above

I know PVLAN can performed on first 2 points, but I can't find anthing on the last point, where I can define L3 ip address for all the 3 VLANS.

Thanks..

10 REPLIES

Re: PVLANs

What is the platform you intened to deply this on?

New Member

Re: PVLANs

catalyst 3750

Re: PVLANs

metro??

New Member

Re: PVLANs

nope..normal 3750 switch..but does it matter ?

Re: PVLANs

Yes it does - as far as I know/remember you can have only one vlan with a layer 3 IP address, normally used for management. The metro version is a layer2 switch and layer3 combined. What is your exact model??

New Member

Re: PVLANs

it a WS-C3750G-48TS-S, it's a L3 switch..

Re: PVLANs

Yep - you should be good to go on giving each VLAN a SVI & IP address.

HTH.

New Member

Re: PVLANs

can i ask..how to configure that with the pvlan config?

New Member

Re: PVLANs

Would an access list be a solution to this scenario also?

122
Views
0
Helpful
10
Replies