Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

PxeBoot Help with DHCP

I have a new cisco 1941 router that I am setting up with pxebooting. I have never setup pxebooting before and i have this setup so far

ip dhcp pool Admin

option 66 ip 192.168.1.4

option 67 ascii pxelinux.0

and i can pull an ip but it keeps getting hung up when it comes to the TFTP part.,

Any help would be much appreciated.

Thanks in advance

4 REPLIES

PxeBoot Help with DHCP

Did you check the option 150?

I think you need it to contact another server as a tftp server.

Alessio

Community Member

PxeBoot Help with DHCP

So make it redundant and set option 150 to the tftp server ip which is 192.168.1.4?

Thanks for the quick response.

Community Member

PxeBoot Help with DHCP

So i figured it out here are the commands to get it to work

ip dhcp pool Admin

network 192.168.1.0 255.255.255.0

bootfile pxelinux.0

next-server 192.168.1.4

default-router 192.168.1.1

dns-server 8.8.8.8

option 66 ip 192.168.1.4

option 150 ip 192.168.1.4

lease 1 23 59

!

Re: PxeBoot Help with DHCP

So rate my post if that helped you

Sent from Cisco Technical Support iPad App

830
Views
5
Helpful
4
Replies
CreatePlease to create content