Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

QoS 3750ME

Can not configure Qos for SVI interface.

Configuration:

Class Map match-any class-default (id 0)

Match any

Class Map match-any cl-voice (id 1)

Match access-group 110

Class Map match-all cl-input (id 2)

Match input-interface GigabitEthernet1/0/1

---

Extended IP access list 110

10 permit ip 192.168.23.0 0.0.0.255 any

20 permit ip 192.168.36.0 0.0.0.255 any

30 permit ip 192.168.34.0 0.0.0.255 any

---------

Policy Map POL-VOICE

Class cl-input

police 10000000 100000 exceed-action drop

Policy Map POL-PARENT

Class cl-voice

set dscp 31

service-policy POL-VOICE

----

interface Vlan120

ip address 172.16.19.2 255.255.255.0

service-policy input POL-PARENT

Networks in the access list are Ip phone networks. Need to offer a rate limit to those networks.

When executing sh policy-map interface vlan 120:

Vlan120

Service-policy input: POL-PARENT

Class-map: cl-voice (match-any)

0 packets, 0 bytes

5 minute offered rate 0 bps, drop rate 0 bps

Match: access-group 110

Service-policy : POL-VOICE

Class-map: cl-input (match-all)

0 packets, 0 bytes

5 minute offered rate 0 bps, drop rate 0 bps

Match: input-interface GigabitEthernet1/0/1

Class-map: class-default (match-any)

0 packets, 0 bytes

5 minute offered rate 0 bps, drop rate 0 bps

Match: any

Class-map: class-default (match-any)

226 packets, 15016 bytes

5 minute offered rate 0 bps, drop rate 0 bps

Match: any

Interface gigabit 1/0/1 is an ingress port from those networks in this case

2 REPLIES
New Member

Re: QoS 3750ME

Problem is still there. Please, help

New Member

Re: QoS 3750ME

up

135
Views
0
Helpful
2
Replies