Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

QOS 6513

I want to enable QOS across my campus network.  I need to prioritize traffic for video and voice.  I have a mix of 3500/3550/3560 at L2 and 6513  w/SUP720 (12.2-33SXI1) at L3. From what I have been able to read at layer 2 I can use auto qos, but what option should I use, cisco-phone,cisco-softphone or trust).  I believe I should use trust, but I am not sure.  Most of my video codex have a DSCP setting of 46.  I was told that my QOS also needs to support TOS 5 or DSCP EF.

  What I havent been able to determine is what QOS settings I need on the 6513, to support these requirements.  Can someone point me in the right directions?

Thank you

mike

1 ACCEPTED SOLUTION

Accepted Solutions
VIP Super Bronze

Re: QOS 6513

Hi Mike,

Refer to this document for QOS design concept in the campus

http://www.cisco.com/en/US/docs/solutions/Enterprise/WAN_and_MAN/QoS_SRND_40/QoSCampus_40.html

HTH

Reza

2 REPLIES
VIP Super Bronze

Re: QOS 6513

Hi Mike,

Refer to this document for QOS design concept in the campus

http://www.cisco.com/en/US/docs/solutions/Enterprise/WAN_and_MAN/QoS_SRND_40/QoSCampus_40.html

HTH

Reza

Re: QOS 6513

Thank you, that is what I needed.

Mike

718
Views
0
Helpful
2
Replies