cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
907
Views
0
Helpful
1
Replies

QoS Configuration for VoIP

suredatasystems
Level 1
Level 1

Hello,

i try to configure QoS on a Cisco Small Business SG300 Switch. I followed the instruction on https://supportforums.cisco.com/docs/DOC-13461 and configured one Port for tagging my Traffic from a Aastra IP Phone. Tagging works fine (i verified with wireshark).

The problem is, that all traffic to a PC connected directly to the Aastra IP Phone is blocked. Is there a possibility to tag any other traffic to the port as a default?

Thx for your help!

1 Reply 1

sandbankhomes
Level 1
Level 1

I'm having a similiar problem on the Cisco SF-300 switch. I followed the same document and configured one port for testing. All traffic to/from that port is now blocked. Have you had any luck resolving your issue?

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: