Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

QoS - CoS 1812

Hi all,

i need to setup a 1812 with the following configuration:

- fastethernet 1 e 2 trunk with vlan 10,20,30,40

- fastethernet 3 with vlan 10 in access mode and Priority 3

- fastethernet 4 with vlan 20 in access mode and priority 4

- fastethernet 5 with vlan 30 in access mode and Priority 5

- fastethernet 6 with vlan 40 in access mode and priority 6

I didn't find any info for configure QoS on Cisco1812.

Is this possible?

Thanks in advanced

1 REPLY
Community Member

Re: QoS - CoS 1812

I found how to:

put the following command under the interface:

"switchport priority default 3"

interface FastEthernet2

switchport priority default 3

end

router#sh inter fast 2 switchport

Name: Fa2

Switchport: Enabled

Administrative Mode: static access

Operational Mode: down

Administrative Trunking Encapsulation: dot1q

Negotiation of Trunking: Disabled

Access Mode VLAN: 1 (default)

Trunking Native Mode VLAN: 1 (default)

Trunking VLANs Enabled: ALL

Trunking VLANs Active: none

Protected: false

Priority for untagged frames: 3

Override vlan tag priority: FALSE

Voice VLAN: none

Appliance trust: none

router#

Diego

236
Views
0
Helpful
1
Replies
CreatePlease to create content