cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
398
Views
0
Helpful
3
Replies

QOS for 3560 access switch

gscalia01
Level 1
Level 1

   Pleae help

we have a class based qos scheme (see attached file) on our 4500 series access switches and we have a access 3560-48 switch runing IOS  Version 12.2(44)SE3 my question is can I use the same QOS scheme for the 3560 switch?

Tanks,

Jack

3 Replies 3

Reza Sharifi
Hall of Fame
Hall of Fame

The commands may not be exactly the same, but the IOS for 3560 supports class based Qos.

here is the config guide for Qos"

http://www.cisco.com/en/US/docs/switches/lan/catalyst3560/software/release/12.2_52_se/configuration/guide/swqos.html#wp1703072

HTH

Reza,

will enabling auto QOS on the swith be just as good?

thanks,

Jack.

Jack,

Yes, for VoIP Qos parameters, Auto Qos with configure it for you automatically

Have a look at the command reference guide for the policy-map auto Qos will configure for you.

http://www.cisco.com/en/US/docs/switches/lan/catalyst3560/software/release/12.2_55_se/command/reference/cli1.html#wp13658183

HTH

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco