Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

QOS for 3560 access switch

   Pleae help

we have a class based qos scheme (see attached file) on our 4500 series access switches and we have a access 3560-48 switch runing IOS  Version 12.2(44)SE3 my question is can I use the same QOS scheme for the 3560 switch?

Tanks,

Jack

3 REPLIES
VIP Super Bronze

QOS for 3560 access switch

The commands may not be exactly the same, but the IOS for 3560 supports class based Qos.

here is the config guide for Qos"

http://www.cisco.com/en/US/docs/switches/lan/catalyst3560/software/release/12.2_52_se/configuration/guide/swqos.html#wp1703072

HTH

New Member

QOS for 3560 access switch

Reza,

will enabling auto QOS on the swith be just as good?

thanks,

Jack.

VIP Super Bronze

Re: QOS for 3560 access switch

Jack,

Yes, for VoIP Qos parameters, Auto Qos with configure it for you automatically

Have a look at the command reference guide for the policy-map auto Qos will configure for you.

http://www.cisco.com/en/US/docs/switches/lan/catalyst3560/software/release/12.2_55_se/command/reference/cli1.html#wp13658183

HTH

276
Views
0
Helpful
3
Replies
CreatePlease to create content