Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

QOS for NX-7K.

Hi,

Currently we are running QOS on CISCO 6K and We are migrating to NX-7K. I need help for understanding QOS and Configuration for NX-7k and explanation with QUEing.

Current 6K Config is given below.

interface GigabitEthernet6/28

logging event link-status

wrr-queue bandwidth 30 70

wrr-queue queue-limit 40 30

wrr-queue random-detect min-threshold 1 40 80

wrr-queue random-detect min-threshold 2 70 80

wrr-queue random-detect max-threshold 1 80 100

wrr-queue random-detect max-threshold 2 80 100

wrr-queue cos-map 1 1 1

wrr-queue cos-map 1 2 0

wrr-queue cos-map 2 1 2 3 4

wrr-queue cos-map 2 2 6 7

mls qos vlan-based

switchport

switchport access vlan XXX

spanning-tree portfast

spanning-tree bpdufilter enable

Thanks

Mohan

Everyone's tags (1)
1 REPLY
Gold

QOS for NX-7K.

Here is a start.

https://supportforums.cisco.com/docs/DOC-20595

I would read the QOS section of NX-OS config guide a few times. QOS can be quite a bit different that what you see and do in IOS.

182
Views
0
Helpful
1
Replies