Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

QOS for VOIP on WS-X6148A-GE-45AF Cat6500 IOS

I am configuring a CAT 6509-E Sup 32 IOS 12.2(33)SXH with WS-X6148A-GE-45AF modules. I wanted to use auto qos but I get errors when enabling it on the above module. The errors state I needed to change the trust state of the ports to COS. I did this and the queuing changed. (See attached text file) I then tried enabling auto qos and still received errors. The queuing after enabling mls qos trust cos on the ports only shows the queues mapped to cos levels. Do I need to manually create the cos-dscp mappings and dscp thresholds here. For example on a 3750 this is done by entering the auto qos command

1 REPLY
New Member

Re: QOS for VOIP on WS-X6148A-GE-45AF Cat6500 IOS

Sorry, heres the text file for the queuing.

471
Views
0
Helpful
1
Replies
CreatePlease to create content