Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

qos need on msfc?

I have cat 6509 with MSFC.MSFC is used to route traffic between VLANs. there are ip phones on the 6509. Myq question is do I need to configure qos on msfc, or just need configure qos on supervisor?

1 REPLY

Re: qos need on msfc?

You would require configuration on the supervisor and not the MSFC.

Have a look at these links for QoS with catOS

http://www.cisco.com/en/US/products/hw/switches/ps700/products_tech_note09186a008014f8a8.shtml

http://www.cisco.com/en/US/products/hw/switches/ps708/products_white_paper09186a00800c8441.shtml

HTH, rate if it does

Narayan

113
Views
4
Helpful
1
Replies
CreatePlease to create content