Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

QoS on 2960 Lan Base Image

Hi,

I would like to know, if I could configurate QoS using MLP (using acl to classify the traffic, using class-map and policy-map?

Switch Model : WS-C2960G-48TC-L

flash:c2960-lanbase-mz.122-35.SE5/c2960-lanbase-mz.122-35.SE5.bin

Cisco IOS Software, C2960 Software (C2960-LANBASE-M), Version 12.2(35)SE5, RELEASE SOFTWARE (fc1)

Copyright (c) 1986-2007 by Cisco Systems, Inc.

Compiled Thu 19-Jul-07 20:06 by nachen

Image text-base: 0x00003000, data-base: 0x00D40000

ROM: Bootstrap program is C2960 boot loader

BOOTLDR: C2960 Boot Loader (C2960-HBOOT-M) Version 12.2(25r)SEE1, RELEASE SOFTWARE (fc1)

BU205_P1_R1_SW01 uptime is 5 weeks, 2 days, 46 minutes

System returned to ROM by power-on

System image file is "flash:c2960-lanbase-mz.122-35.SE5/c2960-lanbase-mz.122-35.SE5.bin"

cisco WS-C2960G-48TC-L (PowerPC405) processor (revision C0) with 61440K/4088K bytes of memory.

Processor board ID

Last reset from power-on

1 Virtual Ethernet interface

48 Gigabit Ethernet interfaces

The password-recovery mechanism is enabled.

64K bytes of flash-simulated non-volatile configuration memory.

Base ethernet MAC Address :

Motherboard assembly number :

Power supply part number :

Motherboard serial number :

Power supply serial number :

Model revision number : C0

Motherboard revision number : A0

Model number : WS-C2960G-48TC-L

System serial number :

Top Assembly Part Number :

Top Assembly Revision Number :

Version ID : V02

CLEI Code Number : COM4A10BRB

Hardware Board Revision Number : 0x01

Switch Ports Model SW Version SW Image

------ ----- ----- ---------- ----------

* 1 48 WS-C2960G-48TC-L 12.2(35)SE5 C2960-LANBASE-M

Or I need other IOS ?? For example:

LAN BASE W/O CRYPTO

LAN BASE W/O CRYPTO WITH WEB BASED DEV MGR

LAN BASE

LAN BASE WITH WEB BASED DEV MGR

4 REPLIES

Re: QoS on 2960 Lan Base Image

Here is your QoS config guide for 2960:

http://www.cisco.com/en/US/docs/switches/lan/catalyst2960/software/release/12.2_44_se/configuration/guide/swqos.html

For the features supported, check out the feature navigator:

www.cisco.com/go/fn

New Member

Re: QoS on 2960 Lan Base Image

Lan Base works

Example:

flash:c2960-lanbase-mz.122-25.SEE2/c2960-lanbase-mz.122-25.SEE2.bin

New Member

Re: QoS on 2960 Lan Base Image

What about LanLite images?

New Member

Re: QoS on 2960 Lan Base Image

LanLite IOS does support QoS but only on certain hardware.  For example 2960-24-S does not support QoS.

1903
Views
0
Helpful
4
Replies
CreatePlease login to create content