Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Qos On the switchport connected to PIX

Hi all,

How can I enable QOS on the accessport connected to the PIX to restrict the traffic that people are doing it when downloading to lets say 50k?

Thanks,

4 REPLIES

Re: Qos On the switchport connected to PIX

class-map class1

match any

policy-map policy1

class class1

police 128000 8000 confirm-action transmit exceed-action drop

interface fa1/1

service-policy output policy1

the above example will match all network traffic with match any in the class map then will pemir maximum of 128K or traffic any traffic above that will be droped

and apply to the switch interface in the outbound direction

in the case if this is ur switch interface connected to the firewall it will send maximum of 128K to the firewall through that port

good luck

please Rate if helpful

New Member

Re: Qos On the switchport connected to PIX

All right ,

Thanks I will do this , but now will this affect my VPN tunnel traffic? It will right ?

Thanks

Re: Qos On the switchport connected to PIX

if the vpn go thorugh this switch interface then the vpn will be part of all traffic and might be droped if the switch port go abpve the limit

if the vpn not thorugh this port then nothing to woory about

Super Bronze

Re: Qos On the switchport connected to PIX

You can also add a class for the VPN traffic and not subject it to the bandwidth restriction.

113
Views
0
Helpful
4
Replies
CreatePlease to create content