Team, I have made QOS on the edge router to serve the bandwidth for Voice and set it EF bit. My question is, if incoming packet is already EF bit marked and when it will reach to edge router , then what router will do. Will it remove the ef marking and again put EF marking or it will simply ignore the remarking.
WIll it create any jitter? Here is the configuration
class-map match-any VOICE
match access-group 101 match protocol rtp audio match ip dscp ef
policy-map SW-TRAFFIC class VOICE
priority percent 45 set ip dscp ef
class class-default fair-queue set ip dscp default
This document gives several answers on frequently asked questions for PFRv3 channel state behavior.
Q1: What are all the channel operational states from a BR (border role) perspective and what are the rules/conditions to be in each st...
The need was to reach an host inside a LAN through a VPN connection managed by the LAN gateway (Cisco 1921).
The LAN gateway performs NAT and there was a dedicate nat rule for the host i wanted to reach through VPN.
I couldn't connect to the hos...
We have 3 identical switches configured by someone else and would like to claim some of the Gigabit ports(G1/G2/G3/G4) for use on servers. When we try to change the wiring and configuration, we run in to connectivity issues. Attached is a des...