Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

QoS - Receive Priority Queue - Card Specific

Hi all,

I have a couple of 6500s, 1 is sup720d up and the other is Sup2/MSFCd up.

On the cards in the chassis, the WS-X6724-SFP in the sup720 chassis does not have a receive priority queue, but the WS-X6516-GBIC in the sup2/msfc does.

I assume that there is an archetecture reason for this, but I cant find out why.

Could anyone help?

Many thx

Ken

r1#sh int gi1/23 cap

GigabitEthernet1/23

Model: WS-X6724-SFP

Type: 1000BaseSX

Speed: 1000

Duplex: full

Trunk encap. type: 802.1Q,ISL

Trunk mode: on,off,desirable,nonegotiate

Channel: yes

Broadcast suppression: percentage(0-100)

Flowcontrol: rx-(off,on,desired),tx-(off,on,desired)

Membership: static

Fast Start: yes

QOS scheduling: rx-(2q8t), tx-(1p3q8t)

CoS rewrite: yes

ToS rewrite: yes

Inline power: no

SPAN: source/destination

UDLD yes

Link Debounce: yes

Link Debounce Time: yes

Ports on ASIC: 13-24

s1# sh port cap 3/12

Model WS-X6516-GBIC

Port 3/12

Type 1000BaseSX

AuxiliaryVlan no

Broadcast suppression percentage(0-100)

Channel yes

COPS port group 3/9-12

CoS rewrite yes

Dot1q-all-tagged yes

Dot1x yes

Duplex full

Fast start yes

Flow control receive-(off,on,desired),send-(off,on,desired)

Inline power no

Jumbo frames yes

Link debounce timer yes

Membership static,dynamic

Port ASIC group 3/9,3/11,3/13,3/15

QOS scheduling rx-(1p1q4t),tx-(1p2q2t)

Security yes

SPAN source,destination

Speed 1000

ToS rewrite DSCP

Trunk encap type 802.1Q,ISL

Trunk mode on,off,desirable,auto,nonegotiate

UDLD yes

1 REPLY
Silver

Re: QoS - Receive Priority Queue - Card Specific

550
Views
0
Helpful
1
Replies