Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

QoS setting on Nexus 7000 vpc

Hello everyone

 

For the following configurations configured on 2 x N7000:


interface port-channel301

  description VPC link
  switchport
  switchport mode trunk
  switchport trunk allowed vlan 990
  vpc 301


interface Ethernet14/24
  description VPC link
  switchport
  switchport mode trunk
  switchport trunk allowed vlan 990
  channel-group 301 mode active
  no shutdown

 

What is the simplest way to limit the bandwidth used by outgoing traffic marked with DSCP 46 on int E14/24 (po 301) to 10Mbps?  Module type is either N7K-M224XP-23L or N7K-M132XP-12L.

Also, regarding vPC, is it possible to control the aggregated bandwidth to 10Mbps (since traffic can either go thru N7k-1 or N7k-2 etherchannel member link)?

 

Thanks in advance.

71
Views
0
Helpful
0
Replies
CreatePlease to create content