Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

QOS shape command supported line card

Hi ,

can someone pls tell me which line card supports QOS shaping command.

I tried configuring QOS shape on 6748- GE-Tx, but was not supporting (Later came to know  QOS shaping is not supported on this card).

Can somebody tell me any Line Cards which supports QOS shape command

policy-map SHAPE
  class class-default
    shape average 50000000


my hardware : 6506-e + SUP-2T


Thanks ... Siddu

Super Bronze

DisclaimerThe Author of this


The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.

Liability Disclaimer

In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.


I recall the FlexWAN cards support shaping using a policy map.


Some 6500 line cards and sups (e.g. sup2t) support WRR-queue shape.


Some of the 7600 WAN cards, I believe, support shaping, but likely not supported in the 6500.

CreatePlease login to create content