Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Question about 3750G Stack

Hi All,

If the master switch in one 3750G stack failed, which slave will take control? Does the slave inherit all the settings from master?

Thanks a lot.

Lou

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Question about 3750G Stack

Hello,

When the current master goes down, the slave switch will takeover the master

role and inherit all the settings from the master. Here is a document that

explains the master election. If all other parameters remain same, the

switch with lowest MAC ID will be selected as master.

http://www.cisco.com/en/US/products/hw/switches/ps5023/products_configuratio

n_example09186a00807811ad.shtml#election

Hope this helps.

Regards,

NT

2 REPLIES
Cisco Employee

Re: Question about 3750G Stack

Hello,

When the current master goes down, the slave switch will takeover the master

role and inherit all the settings from the master. Here is a document that

explains the master election. If all other parameters remain same, the

switch with lowest MAC ID will be selected as master.

http://www.cisco.com/en/US/products/hw/switches/ps5023/products_configuratio

n_example09186a00807811ad.shtml#election

Hope this helps.

Regards,

NT

New Member

Re: Question about 3750G Stack

Thanks a lot! It's helpful.

477
Views
0
Helpful
2
Replies