Re: question about VTP pruning in vtp transparent mode
Q1, what's the reason to turn off VTP pruning when one or more switches are in VTP transparent mode?
The switch does not send VTP updates and does not act on VTP updates received from other switches. However, a VTP transparent switch running VTP version 2 does forward received VTP advertisements on all of its trunk links.
Since VTP transparent mode wil not any updates, then no use of enabling VTP pruning.
Q2, actually, after set the mode from server of client to transparent mode when pruning was enabled, pruning is still showed as enabled. Does that mean pruning is working in transparent mode?
Pruning will work only VTP(version 2) transparent mode.VTP version 1 transparent mode will not send any vtp info to other switches.ie)the same functionality of VTP pruning
This document gives several answers on frequently asked questions for PFRv3 channel state behavior.
Q1: What are all the channel operational states from a BR (border role) perspective and what are the rules/conditions to be in each st...
The need was to reach an host inside a LAN through a VPN connection managed by the LAN gateway (Cisco 1921).
The LAN gateway performs NAT and there was a dedicate nat rule for the host i wanted to reach through VPN.
I couldn't connect to the hos...
We have 3 identical switches configured by someone else and would like to claim some of the Gigabit ports(G1/G2/G3/G4) for use on servers. When we try to change the wiring and configuration, we run in to connectivity issues. Attached is a des...