07-03-2013 05:16 AM - edited 03-07-2019 02:12 PM
Hello Experts,
I need your opinion on this scenario where one ESX host has two LAN cards connected to L2 Switch. In this, will the traffic use both links or one would be blocked due to STP and if yes then do I need to configure port channel on switch so that both links to be utilized but keep in mind the other side (esx host) we can't make settings in respect to port channel.
Thanks
Sent from Cisco Technical Support iPhone App
Solved! Go to Solution.
07-03-2013 05:26 AM
You need to create the port-channel on the switch side and also the teaming on the ESX server side to use both the interface of the server.
HTH
Regards
Inayath
07-03-2013 05:26 AM
You need to create the port-channel on the switch side and also the teaming on the ESX server side to use both the interface of the server.
HTH
Regards
Inayath
07-03-2013 05:43 AM
Thanks.
Sent from Cisco Technical Support iPhone App
07-03-2013 05:45 AM
Ray,
May I ask you favour if this has solved the issue could you please rate the post and mark the thread as answered rather than leving it as unanswerd?
HTH
Regards
Inayath
***PLz rate all usefull posts.
07-03-2013 06:10 AM
Done. Thanks for reminding
Sent from Cisco Technical Support iPhone App
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide