I have a delima and wanted to know if someone here could shine a light on this issue.
We have 2 6513's interconnected.
We also have 1 3com 4400POE switch where IP sets (Mitel) are connected to and PC's behind the set.
the Data Vlan is 104 and the Voice Vlan is 108 as configured in the cisco switch.
The 3com only has Native 1 and Voice 108.
The links between the 3com and the 6513 as far as configuratioon on cisco is ACCESS VLAN 104.
Where the problem arises, is Inter-Vlan traffic.
We have several VLANS, and we only want specific VLANs to talk to each other. This is controlled by a set of Fortigate FortiNET systems. But when we take those out of service, somehow the traffic between VLANs is allowed.
What best way to control traffic between VLANs? Example; VLAN104 and talk to 108 but not 106 or 100.... etc...
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.