Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Question on mmc_queuecell error

I've got an 8510 that's showing this error in the log:

Mar  5 09:33:28.736: %AAL5-3-INTERNAL_ERROR:  aal5send: mmc_queuecell failed No room on port 0 vpi 0 vci 5 for cells 1
No room on port 0 vpi 0 vci 5 for cells 1
No room on port 0 vpi 0 vci 5 for cells 1
No room on port 0 vpi 0 vci 5 for cells 1
No room on port 0 vpi 0 vci 5 for cells 1

This happens about twice a minute, about 5 seconds apart. I haven't really run across much online about this message. No performance problems yet, but I want to get this figured out before there are. Anybody know what's causing this?

Thanks!

2 REPLIES

Re: Question on mmc_queuecell error

I've got an 8510 that's showing this error in the log:

Mar  5 09:33:28.736: %AAL5-3-INTERNAL_ERROR:  aal5send: mmc_queuecell failed No room on port 0 vpi 0 vci 5 for cells 1
No room on port 0 vpi 0 vci 5 for cells 1
No room on port 0 vpi 0 vci 5 for cells 1
No room on port 0 vpi 0 vci 5 for cells 1
No room on port 0 vpi 0 vci 5 for cells 1

This happens about twice a minute, about 5 seconds apart. I haven't really run across much online about this message. No performance problems yet, but I want to get this figured out before there are. Anybody know what's causing this?

Thanks!

Hi,

Check out the below link with clear explanation about the error.

http://www.cisco.com/en/US/products/hw/switches/ps718/prod_troubleshooting_guide_chapter09186a00800f0a24.html

Remember to rate the helpful post

Ganesh.H

New Member

Re: Question on mmc_queuecell error

Yes, I have seen that... it's one of the few posts that show up in a search for this error. Unfortunately, the commands it gives to try return nothing. Show epc queuing shows only the headers and show epc status comes back blank. Show mmc ports is now recognized.

303
Views
0
Helpful
2
Replies
CreatePlease to create content